Alliance AxeWEIGH In Motion Truck Scale weighs the individual axles by simply passing the scale at ~ 3 MPH and also calculates the total vehicle weight.
TOWNSHIP, Mass. (PRWEB)
June 12, 2018
Alliance Scale, Inc. has introduced a new truck scale that will dynamically weigh each axle and print a receipt with individual axle weights and the total without a driver stopping.
The Alliance AxeWEIGH In Motion Truck Scale weighs the individual axles by simply passing the scale at ~ 3 MPH and also calculates the total vehicle weight regardless of the length or configuration of the truck. Easy to use, a driver stops at the controller, enters their known tare weight or truck ID to recall a stored tare weight in one pass, or can use two-pass weighing and the controller will calculate the raw values , tare and net.
Equipped with factory calibrated load cells and a pre-programmed indicator, the Alliance AxeWEIGH In Motion weighbridge offers repeatability greater than ± 0.5% on average. Preconfigured for easy installation, these dynamic weighbridges can be installed over a gravel driveway, eliminating the need for expensive ramps. Suitable for a variety of applications, the controller can provide a CSV file with task numbers for each transaction.
The Alliance AxeWEIGH In Motion Truck Scale is priced at $ 19,995, depending on configuration.
For more information, contact:
Alliance Scale, Inc.
Raymond A. Secour, Jr., Marketing
1020 Turnpike Road. / BP 509
Canton, MA 02021-0509
(800) 343-6802 FAX (781) 828-9510
Email: ray (at) alliancescale (dot) com
Share the article on social media or by email: